DMX Merger, XMG-51

XMG-51-HighRes.jpg
Display.jpg
XMG-51-3.jpg
XMG-51-HighRes.jpg
Display.jpg
XMG-51-3.jpg

DMX Merger, XMG-51

0.00

The XMG-51 DMX merger allows you to combine up to five DMX lines together into one. This lets you use multiple DMX lighting control systems simultaneously on a single installation. How the DMX data is merged can be configured accoprding to your needs: The 512 cannels can be split amongst up to five controllers e.g. controller A controls the channels 1-49, controller B controls the channel 50-74 and the channels 200-400 are controlled by controller C.

Several lighting consoles can be used to control the same channels. For example, a single lamp can be accessed by several controllers at the same time. The merger can be set to respond to Latest Takes Precedent (LTP) or Highest Takes Precedent (HTP).

A lighting console could be moved & plugged in at different places of the venue. The merger can then recognize where the controller is plugged in and switch automatically to the corresponding port.

A backup lighting controller can be used at the same time as the main lighting controller by using the XMG-51 merger. The merger will automatically switch to the backup controller in the case of a failure of the main controller.

The XMG-51 has a built-in bypass relay which connects the output to a dedicated input in the event of a power supply failure.

  • 5 x DMX512 inputs.
  • 1 x DMX512 output.
  • Only 50us latency.
  • Bypass relay.
  • Manual switch.
  • HTP, LTP channel, LTP line Modes.
  • Channel offset for each input.

Manufacturer Part No.: 10 15 51

Add To Cart